Welcome to Machine Design Community Sign in | Join | Help
in Search

General Engineering Discussions

Open discussion of engineering issues and problems.
Write a New Post
Page 1 of 4 (65 items) 1 2 3 4 Next >

Topics

Thread Replies
What's "wrong" with young engineers?
Posted by by Leslie_Gordon, 10-15-2009 12:05 PM
-
Wind Power: A critical look
Posted by by Stephen_Mraz, 09-10-2009 9:22 AM
-
setting up forces to properly perform stress analysis
Posted by by J2201987, 04-17-2009 10:26 AM
-
How do you calculate frictional heat between ball acrew and nut?
Posted by by shyamreddysunder, 04-09-2009 12:05 AM
-
physics of holding a gun sideways
Last reply by Zoeboy, 03-28-2009 8:27 PM
5
Making metallic objects when only a physical part is available
Last reply by bhoffice3, 03-23-2009 3:38 PM
6
Halbach Array Motor : Manufacturer or maker information
Last reply by bhoffice3, 03-23-2009 3:14 PM
2
need a motor switch
Last reply by bhoffice3, 03-23-2009 3:07 PM
2
How to control DC motor from 2 locations?
Last reply by cnmaker, 03-11-2009 10:56 PM
3
Needing lighting or power source?
Posted by by cnmaker, 03-11-2009 10:55 PM
-
Purposes of Food Irradiation
Posted by by raymond723, 03-08-2009 11:32 PM
-
need a prox sensor
Last reply by Bob_Repas, 02-26-2009 3:02 PM
1
Design of tubular fire boxes in steam boilers
Posted by by comalitalia, 02-15-2009 8:17 PM
-
How much flexing in machine frame?
Posted by by gtoutounji, 02-14-2009 3:58 PM
-
plastic repairs
Posted by by Lee_Teschler, 01-28-2009 3:23 PM
-
need a flow rate sensor
Posted by by Lee_Teschler, 01-28-2009 1:18 PM
-
motor bearings that fail
Posted by by Lee_Teschler, 01-28-2009 1:14 PM
-
Rotary clamps on flat glass disk edging machines
Posted by by semionb, 01-24-2009 5:43 PM
-
how to do ...
Posted by by menboren, 12-18-2008 6:30 PM
-
How to do?
Posted by by menboren, 12-16-2008 9:18 PM
-
More Options
Page 1 of 4 (65 items) 1 2 3 4 Next >
View as RSS news feed in XML

Shortcuts